China Magnetic Iron Separation Conveyor Drum Pulley alternator pulley

Product Description

Standard Description

Magnetic Head Pulleys provide continuous defense in opposition to Tramp Iron contamination of both big and fine metallic particles. The units give maximum, ongoing safety from tramp iron contamination in the processing of materials this sort of as substances, plastics, grains, foodstuff merchandise, ceramic, and coal.
1. The drum entire body can be created from cheap ferrite magnets. The max magnetic toughness can be up to 15000GS if produced from effective exceptional earth magnets. 

2. Floor materials is 304 or 316L stainless steel which is in good corrosion resistance. 

3. No electric powered energy necessary for magnetic subject technology.

four. A special design and style for 2 ends of the pulley is in order to connect with a motor.

5. An automatic separation method can be fashioned if the pulley operates with each other with the conveyor. 

6. Special demands can be custom made created.

 

Product Bore  Diameter D mm Adapt  Bandwidth B mm Tube Duration  L mm Maximum  Cylinder Induction Strength GS rube Length L  mm Powder Iron  Removal Powder T/h Bodyweight kg A LI K h b
CTZ-32/forty 320 400 five hundred 1500~8000 .eight ten one hundred twenty 728 1571 one hundred fifty fifty three.5 14
CTZ-32/fifty 320 500 600 1500~8000 1 15 a hundred and fifty 850 1115 a hundred and fifteen 50 53.five fourteen
CTZ-40/50 400 five hundred 600 1500~8000 2 twenty 240 850 1350 one hundred fifteen 55 sixty sixteen
CTZ-fifty/fifty 500 500 600 1500~8000 3.5 30 360 850 1350 115 55 60 16
CTZ-32/sixty five 320 650 750 1500~8000 two 20 210 one thousand 1350   55 sixty 16
CTZ-40/65 four hundred 650 750 1500~8000 2.8 thirty 350 a thousand 1630 one hundred thirty five 55 60 16
CTZ-fifty/65 five hundred 650 750 1500~8000 four.five 40 420 one thousand 1630 one hundred thirty five sixty sixty four 18
CTZ-63/sixty five 630 650 750 1500~8000 7 45 830 a thousand 1630

one hundred thirty five

90 97 24
CTZ-forty/eighty 400 800 750 1500~8000 eight fifty five 470 1300 1730 175 70 76 20
CTZ-fifty/80 500 800 950 1500~8000 10 sixty five 600 1300 1730 one hundred seventy five 70 76 twenty
CTZ-sixty three/eighty 630 800 950 1500~8000 eighty 800 1300 1300 2000 one hundred seventy five 70 seventy six 20
CTZ-80/eighty 800 800 950 1500~8000 12 one hundred 980 1300 2000 a hundred seventy five 90 ninety seven 24
CTZ-63/a hundred 630 a thousand 1150 1500~8000 twelve 120 1200 1300 2000 one hundred seventy five ninety 97 24
CTZ-eighty/100 800 one thousand 1150 1500~8000 fifteen one hundred forty 1300 1500   215 110 119 32
CTZ-a hundred/a hundred and twenty a thousand 1200 1400 1500~8000 twenty one hundred eighty 1580 1750 2270 255 one hundred thirty one hundred forty 36
CTZ-one hundred twenty five/a hundred and forty 1250 1400 1600 1500~8000 thirty 250 1950 2000 2555 275 a hundred and fifty 161 40

Inlet and outlet dimensions and specs can be tailored according to customer demands.

 

Alternatives

  • Topped experience

  • Lagging

  • Option of the mounted shaft, mounted bore hubs, or taper lock hubs

  • Rare Earth magnets

 

Software

They constantly are put at the head of the conveyor belt to different iron particle, iron scrap, tramp iron and other ferromagnetic objects from a lot more bulk dry material stream this kind of as iron ore, grain, sand, gravel, plastics, wood, waste, cullet, rubber, and so on

Package


/ Piece
|
1 Piece

(Min. Order)

###

Type: Magnetic Separator
Voltage: 440V
Weight: 1T
Material: Casting Steel
Material Feature: Oil Resistant
Certification: ISO9001:2008, ISO9001:2000, CE

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model Bore  Diameter D mm Adapt  Bandwidth B mm Tube Length  L mm Highest  Cylinder Induction Strength GS rube Length L  mm Powder Iron  Removal Powder T/h Weight kg A LI K h b Magnetic Iron Separation Conveyor Drum Pulley
CTZ-32/40 320 400 500 1500~8000 0.8 10 120 728 1010 100 50 53.5 14
CTZ-32/50 320 500 600 1500~8000 1 15 150 850 1115 115 50 53.5 14
CTZ-40/50 400 500 600 1500~8000 2 20 240 850 1350 115 55 60 16
CTZ-50/50 500 500 600 1500~8000 3.5 30 360 850 1350 115 55 60 16
CTZ-32/65 320 650 750 1500~8000 2 20 210 1000 1350   55 60 16
CTZ-40/65 400 650 750 1500~8000 2.8 30 350 1000 1630 135 55 60 16
CTZ-50/65 500 650 750 1500~8000 4.5 40 420 1000 1630 135 60 64 18
CTZ-63/65 630 650 750 1500~8000 7 45 830 1000 1630

135

90 97 24
CTZ-40/80 400 800 750 1500~8000 8 55 470 1300 1730 175 70 76 20
CTZ-50/80 500 800 950 1500~8000 10 65 600 1300 1730 175 70 76 20
CTZ-63/80 630 800 950 1500~8000 80 800 1300 1300 2000 175 70 76 20
CTZ-80/80 800 800 950 1500~8000 12 100 980 1300 2000 175 90 97 24
CTZ-63/100 630 1000 1150 1500~8000 12 120 1200 1300 2000 175 90 97 24
CTZ-80/100 800 1000 1150 1500~8000 15 140 1300 1500   215 110 119 32
CTZ-100/120 1000 1200 1400 1500~8000 20 180 1580 1750 2270 255 130 140 36
CTZ-125/140 1250 1400 1600 1500~8000 30 250 1950 2000 2555 275 150 161 40

/ Piece
|
1 Piece

(Min. Order)

###

Type: Magnetic Separator
Voltage: 440V
Weight: 1T
Material: Casting Steel
Material Feature: Oil Resistant
Certification: ISO9001:2008, ISO9001:2000, CE

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model Bore  Diameter D mm Adapt  Bandwidth B mm Tube Length  L mm Highest  Cylinder Induction Strength GS rube Length L  mm Powder Iron  Removal Powder T/h Weight kg A LI K h b Magnetic Iron Separation Conveyor Drum Pulley
CTZ-32/40 320 400 500 1500~8000 0.8 10 120 728 1010 100 50 53.5 14
CTZ-32/50 320 500 600 1500~8000 1 15 150 850 1115 115 50 53.5 14
CTZ-40/50 400 500 600 1500~8000 2 20 240 850 1350 115 55 60 16
CTZ-50/50 500 500 600 1500~8000 3.5 30 360 850 1350 115 55 60 16
CTZ-32/65 320 650 750 1500~8000 2 20 210 1000 1350   55 60 16
CTZ-40/65 400 650 750 1500~8000 2.8 30 350 1000 1630 135 55 60 16
CTZ-50/65 500 650 750 1500~8000 4.5 40 420 1000 1630 135 60 64 18
CTZ-63/65 630 650 750 1500~8000 7 45 830 1000 1630

135

90 97 24
CTZ-40/80 400 800 750 1500~8000 8 55 470 1300 1730 175 70 76 20
CTZ-50/80 500 800 950 1500~8000 10 65 600 1300 1730 175 70 76 20
CTZ-63/80 630 800 950 1500~8000 80 800 1300 1300 2000 175 70 76 20
CTZ-80/80 800 800 950 1500~8000 12 100 980 1300 2000 175 90 97 24
CTZ-63/100 630 1000 1150 1500~8000 12 120 1200 1300 2000 175 90 97 24
CTZ-80/100 800 1000 1150 1500~8000 15 140 1300 1500   215 110 119 32
CTZ-100/120 1000 1200 1400 1500~8000 20 180 1580 1750 2270 255 130 140 36
CTZ-125/140 1250 1400 1600 1500~8000 30 250 1950 2000 2555 275 150 161 40

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows two blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the two blocks is the total tension and the force acting on the pulley is the weight of the two blocks.
This simple mechanism uses two simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are three basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The two most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than one “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than one type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are three main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have one advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which two pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to four times their force when used in hydraulic lifts.

China Magnetic Iron Separation Conveyor Drum Pulley     alternator pulley	China Magnetic Iron Separation Conveyor Drum Pulley     alternator pulley
editor by CX 2023-03-31