China manufacturer Mining Use Guide Rope Pulley Head Sheave pulley puller

Product Description

 Mining Use Xihu (West Lake) Dis. Rope Pulley Head Sheave

 

Xihu (West Lake) Dis. wheel device can transport the whole under the premise of swimming round and fixed wheel adopts integral cast joint structure, wheel hub, wheel rim for cast steel materials, spoke for the channel steel, after welding the whole annealing process again. 
Considering the replacement bearing maintenance convenient, leave replace bearing remove space, guide wheel device structure adopted eccentric layout. 
Xihu (West Lake) Dis. shaft using middle carbon alloy steel forging whole, adopting the structure of the cast joint pulley, equipped with PVC or nylon liner, protect the wire rope. 
Imported or domestic spherical roller bearings, also can install bearing temperature measuring element. 
In order to prolong the service life of wire rope, rim inside wedge liner with wear-resisting, withstand voltage, using D660 (1571) or nylon liner. 
1) eccentric layout: on 1 side of a winding wheel have replaced bearing dismantling space, can not remove the pulley mechanism, only for bearing maintenance and replacement. 
2) symmetry layout: relative with 4 wheels on both sides of the 2 bearing seat is symmetrical, but need to replace the bearing shell, only to remove the pulley mechanism. 
 
sheave pulley and the common malfunction and technical guide wheel 
1) to the problem of old structure pulley sliding bearing to burn tile should improve lubrication way; Because of the pulley is installed on the derrick, daily maintenance inconvenience, should add temperature alarm device, so as to timely maintenance to prevent the tile burning failure, or the original sliding bearing replacement into rolling bearing structure 
2) for old structure pulley rope groove without liner, can no longer add padding on the original rope groove, need to change a gasketed pulley, adjacent assembly size can remain motionless, and installation 
3) for mountain transportation difficulties or have some difficulties in roadway transportation in underground mine, the pulley is (guide wheel) change the structure into 2 or 4 and a half of head sheave.

Specifications

Product name Coal mine use head sheave
Material 45#,Q235B,Q235A,Q345A,Q345B,alloy steel,carbon steel,etc
Heat treatment Normalizing,annealing,aging,hardening and tempering
Process Blanking,bending,spicing,welding,
abrasive blasting(shot blasting),milling,drilling,tapping,test
Main equipment 1.6m,5m CNC Vertical Lathe; 8m,6m,5m Horizontal Lathe; milling machine; 6m,4m,3m,2m, CNC boring&milling machine; 2 sets CNC Lathes,2sets CNC Machining center VMC 850L;80mm,50mm drilling machine; Plasma cutting machine; CNC cutting machine; Bending machine; Rolling machine;plate shearing machine; submerged arc welding; gas shielded welding; argon arc welding;  large spray room etc.
Max. diameter 15000mm
Inspection dimension inspection, external environment test, visual inspection, incoming inspection, finished product inspection, flaw detection
Max. weight 10T

About Us:
CITICHL Heavy Industries CO., LTD. The former was CITIC Heavy Machinery Co., Ltd. It was used be subsidiary of CITIC heavy machinery co., ltd. The company was founded in 1981 and finished joint stock reform in 2005, which is located in HangZhou city, capital city of 9 dynasties in ancient times.
With a garden-like industrial park and modern standard plant covering 80000 square meters, CHINAMFG possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized 1 with product designing, manufacture, installation and technical services.
The products comprise all the equipments used in mining, ore dressing, hoisting, coal preparation, crushing and grinding, cement plant, metallurgic and steel rolling, environment protection, and also power generator, heavy-duty gear reducers and large-sized castings and forgings, etc.
CITICHL is national major industry and heavy machinery manufacturing base in the middle of china, we can supply the customers with important complete technical equipments in mining, non-ferrous metal, chemical industry, metallurgy, construction materials, environment protection, and power generating as well as other basic industries. The company can accept the packed engineering project. Our products are sold well to countries and regions in Asia, Africa, Europe, and Australia, and hold a large market share home and abroad.

 

Type: Head Sheave
Driven Type: AC
Speed: Fast
Carrying Capacity: Weight Level
Tonnage: 2T
Reel Number: 1 or 2
Customization:
Available

|

Customized Request

rope pulley

What is the significance of rope diameter in selecting the right rope pulley?

The rope diameter plays a significant role in selecting the right rope pulley. Here’s a detailed explanation:

1. Compatibility: The rope diameter must match the groove size of the pulley. Choosing a pulley with a groove that is too small for the rope diameter can result in excessive friction, wear, and potential damage to the rope. Conversely, selecting a pulley with a groove that is too large may cause the rope to slip or become unstable during operation. Therefore, selecting a rope pulley that is compatible with the specific rope diameter ensures proper engagement and efficient functioning.

2. Load Capacity: The rope diameter directly affects the load capacity of the pulley system. Thicker ropes typically have higher load-bearing capabilities due to their increased strength and durability. When selecting a rope pulley, it is crucial to consider the anticipated load requirements and choose a pulley that can safely support the expected loads for the given rope diameter.

3. Bending Radius: The rope diameter determines the minimum bending radius required for the rope to pass through the pulley. Using a pulley with a smaller bending radius than the rope diameter can cause excessive strain and deformation of the rope, leading to premature failure. It is essential to select a rope pulley that accommodates the bending radius recommended for the specific rope diameter to ensure the longevity and reliability of the system.

4. Efficiency: The rope diameter also affects the overall efficiency of the pulley system. Thicker ropes generally have lower flexibility and increased resistance to bending, which can result in higher friction losses within the pulley. Choosing a pulley with an appropriate groove size for the rope diameter helps minimize friction and energy losses, improving the overall efficiency of the system.

5. Application Specifics: Different applications may require specific rope diameters based on factors such as load requirements, environmental conditions, and safety considerations. For example, heavy-duty applications may necessitate thicker ropes to handle larger loads, while lighter applications may utilize thinner ropes for easier handling and reduced weight. Selecting the right rope pulley involves considering the application-specific requirements and matching them with the appropriate rope diameter.

6. Manufacturers’ Recommendations: It is important to consult the manufacturers’ recommendations and guidelines for selecting the right rope pulley based on the rope diameter. Manufacturers often provide specifications and compatibility charts that outline the suitable pulley options for different rope diameters. Following these recommendations ensures optimal performance, safety, and reliability of the rope pulley system.

Considering the significance of rope diameter in selecting the right rope pulley is crucial for ensuring proper engagement, load capacity, bending radius compliance, efficiency, application suitability, and adherence to manufacturers’ guidelines. By choosing a rope pulley that matches the specific rope diameter, the overall performance and longevity of the pulley system can be maximized.

rope pulley

How does the groove design of a rope pulley impact its performance?

The groove design of a rope pulley plays a significant role in its performance and the overall efficiency of the pulley system. Here’s a detailed explanation of how the groove design impacts pulley performance:

1. Friction and Wear: The groove design affects the frictional interaction between the rope and the pulley. A well-designed groove minimizes friction, reducing wear on both the rope and the pulley itself. Smooth and rounded groove profiles help prevent excessive abrasion or damage to the rope, leading to improved durability and longevity.

2. Grip and Traction: The groove design determines the grip and traction between the rope and the pulley. An appropriate groove profile ensures sufficient contact between the rope and the pulley, preventing slippage during lifting or movement. Adequate grip and traction are crucial for maintaining control and stability in the pulley system.

3. Efficiency and Mechanical Advantage: The groove design affects the efficiency of force transmission and the mechanical advantage obtained from the pulley system. A well-designed groove reduces energy losses due to friction, allowing for more efficient transfer of force. The shape, depth, and width of the groove influence the angle of rope contact and the distribution of force, impacting the mechanical advantage achieved.

4. Rope Compatibility: The groove design should be compatible with the type and diameter of the rope used. Different ropes have varying characteristics, such as flexibility, diameter, and surface texture. The groove design should accommodate the specific rope properties, ensuring proper fit and engagement. This compatibility ensures optimal performance and prevents rope slippage or damage.

5. Debris and Contaminant Clearance: The groove design should facilitate the clearance of debris, dirt, or contaminants that may accumulate during operation. Grooves with appropriate depth, width, and self-cleaning features prevent the build-up of foreign substances, maintaining smooth rope movement and consistent performance.

Overall, the groove design of a rope pulley impacts its performance by influencing friction, wear, grip, traction, efficiency, mechanical advantage, rope compatibility, and debris clearance. Engineers and designers consider these factors when selecting or designing pulleys to optimize performance, reduce wear and tear, and ensure safe and reliable operation of the pulley system.

rope pulley

In which industries are rope pulleys commonly employed?

Rope pulleys find extensive usage across various industries due to their versatility and ability to provide mechanical advantage. Here are some industries where rope pulleys are commonly employed:

  • Construction and Engineering: Rope pulleys are widely used in the construction and engineering industry. They assist in lifting and moving heavy building materials, operating cranes and hoists, and facilitating rigging operations. Rope pulleys are essential in tasks such as erecting structures, positioning equipment, and transporting materials on construction sites.
  • Manufacturing and Warehousing: In manufacturing facilities and warehouses, rope pulleys play a crucial role in material handling, assembly line operations, and conveyor systems. They are used to guide and redirect belts or ropes, facilitating the movement and transport of goods. Rope pulleys ensure efficient workflow and optimize productivity in these industries.
  • Maritime and Shipping: Rope pulleys are integral to the maritime and shipping industry. They are utilized in various applications onboard ships and boats, including sailing systems, winches, cranes, and rigging operations. Rope pulleys enable the adjustment of sails, lifting heavy loads, and maneuvering equipment and rigging on vessels.
  • Outdoor Recreation and Adventure: Rope pulleys play a significant role in outdoor recreational activities such as rock climbing, mountaineering, zip-lining, and rope courses. They are used in pulley systems to provide mechanical advantage, facilitate controlled movement, and ensure safety during these adventure sports.
  • Rescue and Emergency Services: Rope pulleys are essential in rescue and emergency services. They are employed in scenarios such as mountain rescue, confined space rescue, and swiftwater rescue. Rope pulleys enable controlled lowering or raising of personnel and equipment, ensuring safe and efficient extraction in critical situations.
  • Agriculture and Forestry: In the agriculture and forestry sectors, rope pulleys are used for various tasks such as lifting heavy loads, handling equipment, and facilitating forestry operations. They assist in tasks like tree felling, log skidding, and material transport, contributing to the efficiency and productivity of these industries.

These are just a few examples of the industries where rope pulleys are commonly employed. Their versatile nature and ability to enhance mechanical advantage make them valuable tools in a wide range of applications. The specific industry and application requirements dictate the selection of appropriate rope pulleys to optimize performance, efficiency, and safety.

China manufacturer Mining Use Guide Rope Pulley Head Sheave   pulley puller		China manufacturer Mining Use Guide Rope Pulley Head Sheave   pulley puller
editor by CX