China T2.5 T5 T10 T20 At5 At10 Timing Pulley Customize All Kinds of Synchronizing Sprocket belt pulley

Item Description

CZPT Machinery gives a broad selection of substantial good quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. Regular and non-standard pulleys according to drawings are offered.

 
Kinds of materials:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Steel Timing Pulley
  3. GG25 HT250 Forged Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Metal Timing Pulley
  5. Other materials on need, such as cooper, bronze and plastic
 
Kinds of surface treatment
 1.  Anodized floor -Aluminum Pulleys
 2.  Hard anodized area — Aluminum Pulleys
 3.  Black Oxidized area — Steel Pulleys
 4. Zinc plated surface area — Steel Pulleys
 5. Chromate area — Steel Pulleys  Solid Iron Pulleys
 6. Nickel plated floor –Steel Pulleys  Cast Iron Pulleys
 
Types of enamel profile

Tooth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL one/5″(5.08MM)
L 3/8″(9.525MM)
H 1/2″(twelve.7MM)
XH 7/8″(22.225MM)
XXH one 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Types of pitches and measurements

Imperial Inch Timing Belt Pulley,
1.     Pilot Bore MXL571 for 6.35mm timing belt tooth variety from 16 to seventy two
two.  Pilot Bore XL037 for 9.53mm timing belt teeth variety from ten to seventy two
three.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt tooth variety from ten to one hundred twenty
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt enamel amount from ten to 120
5.  Pilot Bore, Taper Bore L100 for twenty five.4mm timing belt tooth quantity from ten to a hundred and twenty
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt tooth amount from 14 to fifty
seven.  Pilot Bore, Taper Bore H100 for twenty five.4mm timing belt enamel quantity from 14 to 156
eight.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt tooth variety from fourteen to 156
9.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt teeth number from 14 to 156
10.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt teeth variety from 14 to 156
eleven.  Taper Bore XH200 for 50.8mm timing belt tooth number from eighteen to 120
12.  Taper Bore XH300 for 76.2mm timing belt teeth quantity from eighteen to a hundred and twenty
13.  Taper Bore XH400 for one hundred and one.6mm timing belt teeth variety from 18 to one hundred twenty

Metric Timing Belt Pulley T and AT
one.  Pilot Bore T2.5-16 for 6mm timing belt enamel number from 12 to 60 
2.   Pilot Bore T5-21 for 10mm timing belt enamel amount from 10 to 60 
3.   Pilot Bore T5-27 for 16mm timing belt tooth quantity from 10 to 60 
four.   Pilot Bore T5-36 for 25mm timing belt enamel amount from 10 to 60 
five.   Pilot Bore T10-31 for 16mm timing belt enamel amount from 12 to 60 
6.   Pilot Bore T10-40 for 25mm timing belt enamel variety from 12 to 60 
seven.   Pilot Bore T10-47 for 32mm timing belt teeth amount from eighteen to 60 
eight.   Pilot Bore T10-66 for 50mm timing belt teeth amount from eighteen to 60
nine.  Pilot Bore AT5-21 for 10mm timing belt tooth quantity from 12 to 60
ten. Pilot Bore AT5-27 for 16mm timing belt enamel amount from twelve to sixty
eleven. Pilot Bore AT5-36 for 25mm timing belt teeth quantity from twelve to 60 
twelve. Pilot Bore AT10-31 for 16mm timing belt tooth number from fifteen to 60 
13. Pilot Bore AT10-40 for 25mm timing belt teeth variety from fifteen to 60 
14. Pilot Bore AT10-47 for 32mm timing belt enamel amount from eighteen to 60 
fifteen. Pilot Bore AT10-66 for 50mm timing belt tooth amount from eighteen to 60
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06 3M-09 3M-fifteen teeth quantity from 10 to 72 
2.  HTD5M-09 5M-15 5M-25 tooth amount from twelve to 72 
three.  HTD8M-20 8M-30 8M-50 8M-85 enamel number from 22 to 192 
4.  HTD14M-40 14M-fifty five 14M-85 14M-a hundred and fifteen 14M-one hundred seventy enamel amount from 28-216 
five.  Taper Bore HTD5M-15 8M-20 8M-30 8M-50 8M-eighty five 14M-40 14M-fifty five 14M-85
         14M-one hundred fifteen 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-twelve PCGT8M-21 PCGT8M-36 PCGT8M-62 
two.      PCGT14M-twenty PCGT14M-37 PCGT14M-68 PCGT14M-ninety PCGT14M-125

Electricity Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
one. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-fifteen, 5GT-twenty five for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
one.   RPP3M-06 3M-09 3M-15 tooth quantity from 10 to 72 
two.   RPP5M-09 5M-15 5M-twenty five teeth variety from twelve to 72 
three.   RPP8M-20 8M-30 8M-50 8M-85 teeth amount from 22 to 192 
four.   RPP14M-40 14M-fifty five 14M-eighty five 14M-one hundred fifteen 14M-one hundred seventy teeth variety from 28-216 
5.  Taper Bore RPP5M-fifteen 8M-20 8M-thirty 8M-50 8M-eighty five 14M-40 14M-fifty five 14M-eighty five
     14M-a hundred and fifteen 14M-one hundred seventy

US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Aluminum
Surface Treatment: Zinc Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant, Industry

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Aluminum
Surface Treatment: Zinc Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant, Industry

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

How to use the pulley system

Using a pulley system is a great way to move things around your home, but how do you use a pulley system? Let’s look at the basic equations that describe a pulley system, the types of pulleys, and some safety considerations when using pulleys. Here are some examples. Don’t worry, you’ll find all the information you need in one place!
pulley

Basic equations of pulley systems

The pulley system consists of pulleys and chords. When the weight of the load is pulled through the rope, it slides through the groove and ends up on the other side. When the weight moves, the applied force must travel nx distance. The distance is in meters. If there are four pulleys, the distance the rope will travel will be 2×24. If there are n pulleys, the distance traveled by the weight will be 2n – 1.
The mechanical advantage of the pulley system increases with distance. The greater the distance over which the force is applied, the greater the leverage of the system. For example, if a set of pulleys is used to lift the load, one should be attached to the load and the other to the stand. The load itself does not move. Therefore, the distance between the blocks must be shortened, and the length of the line circulating between the pulleys must be shortened.
Another way to think about the acceleration of a pulley system is to think of ropes and ropes as massless and frictionless. Assuming the rope and pulley are massless, they should have the same magnitude and direction of motion. However, in this case the quality of the string is a variable that is not overdone. Therefore, the tension vector on the block is labeled with the same variable name as the pulley.
The calculation of the pulley system is relatively simple. Five mechanical advantages of the pulley system can be found. This is because the number of ropes supporting the load is equal to the force exerted on the ropes. When the ropes all move in the same direction, they have two mechanical advantages. Alternatively, you can use a combination of movable and fixed pulleys to reduce the force.
When calculating forces in a pulley system, you can use Newton’s laws of motion. Newton’s second law deals with acceleration and force. The fourth law tells us that tension and gravity are in equilibrium. This is useful if you need to lift heavy objects. The laws of motion help with calculations and can help you better understand pulley systems.
pulley

Types of pulleys

Different types of pulleys are commonly used for various purposes, including lifting. Some pulleys are flexible, which means they can move freely around a central axis and can change the direction of force. Some are fixed, such as hinges, and are usually used for heavier loads. Others are movable, such as coiled ropes. Whatever the purpose, pulleys are very useful in raising and lowering objects.
Pulleys are common in many different applications, from elevators and cargo lift systems to lights and curtains. They are also used in sewing machine motors and sliding doors. Garage and patio doors are often equipped with pulleys. Rock climbers use a pulley system to climb rocks safely. These pulley systems have different types of pinions that allow them to balance weight and force direction.
The most common type of pulley is the pulley pulley system. The pulley system utilizes mechanical advantages to lift weight. Archimedes is thought to have discovered the pulley around 250 BC. in ancient Sicily. Mesopotamians also used pulleys, they used ropes to lift water and windmills. Pulley systems can even be found at Stonehenge.
Another type of pulley is called a compound pulley. It consists of a set of parallel pulleys that increase the force required to move large objects. This type is most commonly used in rock climbing and sailing, while composite pulleys can also be found in theater curtains. If you’re wondering the difference between these two types of pulleys, here’s a quick overview:

Mechanical Advantages of Pulley Systems

Pulley systems offer significant mechanical advantages. The ability of the system to reduce the effort required to lift weights increases with the number of rope loops. This advantage is proportional to the number of loops in the system. If the rope had only one loop, then a single weight would require the same amount of force to pull. But by adding extra cycles, the force required will be reduced.
The pulley system has the advantage of changing the direction of the force. This makes it easier to move heavy objects. They come in both fixed and mobile. Pulleys are used in many engineering applications because they can be combined with other mechanisms. If you want to know what a pulley can do, read on! Here are some examples. Therefore, you will understand how they are used in engineering.
Single-acting pulleys do not change direction, but compound pulleys do. Their mechanical advantage is six. The compound pulley system consists of a movable pulley and a fixed pulley. The mechanical advantage of the pulley system increases as the number of movable wheels decreases. So if you have two wheels, you need twice as much force to lift the same weight because you need a movable pulley.
The mechanical advantage of a pulley system can be maximized by adding more pulleys or rope lengths. For example, if you have a single pulley system, the mechanical advantage is one of the smallest. By using two or three pulleys, up to five times the mechanical advantage can be achieved. You can also gain up to ten times the mechanical advantage by using multiple pulley systems.
The use of a single movable pulley system also adds to the mechanical advantage of the pulley system. In this case, you don’t have to change the direction of the force to lift the weight. In contrast, a movable pulley system requires you to move the rope farther to generate the same force. Using a compound pulley system allows you to lift heavy loads with ease.
pulley

Safety Issues When Using Pulley Systems

Pulleys have an incredibly unique structure, consisting of a disc with a groove in the middle and a shaft running through it. A rope or cord is attached to one end of a pulley that turns when force is applied. The other end of the rope is attached to the load. This mechanical advantage means that it is much easier to pull an object using the pulley system than to lift the same object by hand.
Although pulley systems are a common part of many manufacturing processes, some employers do not train their workers to use them properly or install protection to prevent injury. It is important to wear proper PPE and follow standard laboratory safety practices during pulley system activities. Make sure any support structures are strong enough to handle the weight and weight of the rope or rope. If you do fall, be sure to contact your employer immediately.

China T2.5 T5 T10 T20 At5 At10 Timing Pulley Customize All Kinds of Synchronizing Sprocket     belt pulley	China T2.5 T5 T10 T20 At5 At10 Timing Pulley Customize All Kinds of Synchronizing Sprocket     belt pulley
editor by czh 2022-12-27