Product Description
Mining Use Xihu (West Lake) Dis. Rope Pulley Head Sheave
Xihu (West Lake) Dis. wheel device can transport the whole under the premise of swimming round and fixed wheel adopts integral cast joint structure, wheel hub, wheel rim for cast steel materials, spoke for the channel steel, after welding the whole annealing process again.
Considering the replacement bearing maintenance convenient, leave replace bearing remove space, guide wheel device structure adopted eccentric layout.
Xihu (West Lake) Dis. shaft using middle carbon alloy steel forging whole, adopting the structure of the cast joint pulley, equipped with PVC or nylon liner, protect the wire rope.
Imported or domestic spherical roller bearings, also can install bearing temperature measuring element.
In order to prolong the service life of wire rope, rim inside wedge liner with wear-resisting, withstand voltage, using D660 (1571) or nylon liner.
1) eccentric layout: on 1 side of a winding wheel have replaced bearing dismantling space, can not remove the pulley mechanism, only for bearing maintenance and replacement.
2) symmetry layout: relative with 4 wheels on both sides of the 2 bearing seat is symmetrical, but need to replace the bearing shell, only to remove the pulley mechanism.
sheave pulley and the common malfunction and technical guide wheel
1) to the problem of old structure pulley sliding bearing to burn tile should improve lubrication way; Because of the pulley is installed on the derrick, daily maintenance inconvenience, should add temperature alarm device, so as to timely maintenance to prevent the tile burning failure, or the original sliding bearing replacement into rolling bearing structure
2) for old structure pulley rope groove without liner, can no longer add padding on the original rope groove, need to change a gasketed pulley, adjacent assembly size can remain motionless, and installation
3) for mountain transportation difficulties or have some difficulties in roadway transportation in underground mine, the pulley is (guide wheel) change the structure into 2 or 4 and a half of head sheave.
Specifications
| Product name | Coal mine use head sheave |
| Material | 45#,Q235B,Q235A,Q345A,Q345B,alloy steel,carbon steel,etc |
| Heat treatment | Normalizing,annealing,aging,hardening and tempering |
| Process | Blanking,bending,spicing,welding, abrasive blasting(shot blasting),milling,drilling,tapping,test |
| Main equipment | 1.6m,5m CNC Vertical Lathe; 8m,6m,5m Horizontal Lathe; milling machine; 6m,4m,3m,2m, CNC boring&milling machine; 2 sets CNC Lathes,2sets CNC Machining center VMC 850L;80mm,50mm drilling machine; Plasma cutting machine; CNC cutting machine; Bending machine; Rolling machine;plate shearing machine; submerged arc welding; gas shielded welding; argon arc welding; large spray room etc. |
| Max. diameter | 15000mm |
| Inspection | dimension inspection, external environment test, visual inspection, incoming inspection, finished product inspection, flaw detection |
| Max. weight | 10T |
About Us:
CITICHL Heavy Industries CO., LTD. The former was CITIC Heavy Machinery Co., Ltd. It was used be subsidiary of CITIC heavy machinery co., ltd. The company was founded in 1981 and finished joint stock reform in 2005, which is located in HangZhou city, capital city of 9 dynasties in ancient times.
With a garden-like industrial park and modern standard plant covering 80000 square meters, CHINAMFG possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized 1 with product designing, manufacture, installation and technical services.
The products comprise all the equipments used in mining, ore dressing, hoisting, coal preparation, crushing and grinding, cement plant, metallurgic and steel rolling, environment protection, and also power generator, heavy-duty gear reducers and large-sized castings and forgings, etc.
CITICHL is national major industry and heavy machinery manufacturing base in the middle of china, we can supply the customers with important complete technical equipments in mining, non-ferrous metal, chemical industry, metallurgy, construction materials, environment protection, and power generating as well as other basic industries. The company can accept the packed engineering project. Our products are sold well to countries and regions in Asia, Africa, Europe, and Australia, and hold a large market share home and abroad.
| Type: | Head Sheave |
|---|---|
| Driven Type: | AC |
| Speed: | Fast |
| Carrying Capacity: | Weight Level |
| Tonnage: | 2T |
| Reel Number: | 1 or 2 |
| Customization: |
Available
| Customized Request |
|---|
What impact does rope pulley design have on load-bearing capacity and overall performance?
The design of a rope pulley has a significant impact on its load-bearing capacity and overall performance. Here’s a detailed explanation:
Groove Shape:
The shape of the groove in a rope pulley affects its load-bearing capacity and performance:
1. V-Shaped Groove: A V-shaped groove design is commonly used in pulleys. It provides better engagement with the rope, allowing for increased load-bearing capacity. The V-shape helps prevent the rope from slipping out of the groove and improves the pulley’s ability to distribute the load evenly.
2. U-Shaped Groove: U-shaped grooves are also utilized in certain pulley designs. While they may not offer the same level of load-bearing capacity as V-shaped grooves, they provide a smoother surface for the rope to run on. U-shaped grooves are often used in applications where minimizing rope wear and friction is a priority.
3. Flat or Round Groove: Some pulleys have flat or round grooves. These designs are typically used in low-load applications where rope wear and friction are not significant concerns. Flat or round grooves may be found in pulleys used for light-duty tasks or in situations where the primary focus is redirecting the rope rather than maximizing load-bearing capacity.
Material:
The choice of material for the pulley affects its load-bearing capacity, durability, and overall performance:
1. Metal: Metal pulleys, such as those made from aluminum or steel, are known for their strength and high load-bearing capacity. They are commonly used in heavy-duty applications where substantial loads are involved. Metal pulleys provide durability and resistance to wear, making them suitable for demanding environments.
2. Plastic: Plastic pulleys are lightweight, cost-effective, and suitable for lighter loads or non-industrial applications. They may be used in residential settings, recreational activities, or situations where weight reduction is a priority. Plastic pulleys can offer smooth operation and are less likely to cause damage to ropes or cables.
3. Composite: Composite pulleys are constructed using a combination of materials, such as fiberglass or carbon fiber reinforced with polymers. These pulleys provide a balance between strength, weight reduction, and resistance to corrosion. Composite pulleys are often utilized in outdoor and marine applications where exposure to moisture or harsh environments is a concern.
Bearing Type:
The bearing type used in a rope pulley impacts its overall performance:
1. Bushings: Pulleys with bushings are cost-effective and suitable for light to moderate loads. Bushings provide a friction interface between the pulley and the axle, allowing for smooth rotation. However, they may require periodic lubrication to maintain optimal performance.
2. Ball Bearings: Pulleys equipped with ball bearings offer superior performance, especially in high-load or high-speed applications. The ball bearings reduce friction and enable the pulley to rotate smoothly. Ball-bearing pulleys are commonly used in industrial settings, where efficiency and reliability are paramount.
3. Roller Bearings: Roller bearings provide enhanced load-bearing capacity and durability compared to bushings or ball bearings. They can handle heavy loads and are often used in demanding industrial applications.
The design of a rope pulley, including the groove shape, material choice, and bearing type, directly influences its load-bearing capacity and overall performance. Selecting the appropriate pulley design based on the specific application requirements is crucial for ensuring safe and efficient operation.
Additionally, it’s important to follow manufacturer guidelines and industry standards when selecting and using rope pulleys to ensure compatibility, safety, and optimal performance.
Can rope pulleys be customized for specific industrial needs?
Yes, rope pulleys can be customized to meet specific industrial needs. Here’s a detailed explanation:
1. Load Capacity: Rope pulleys can be customized to handle different load capacities. The size, material, and construction of the pulley can be tailored to accommodate specific weight requirements, whether it’s for light loads or heavy-duty applications.
2. Environmental Conditions: Industries often operate in diverse environmental conditions, such as extreme temperatures, corrosive environments, or high levels of moisture. Customized rope pulleys can be designed with materials and coatings that provide enhanced resistance to these conditions, ensuring optimal performance and longevity.
3. Specialized Applications: Certain industries have unique requirements that call for specialized rope pulleys. For example, in the entertainment industry, specialized pulleys are used for rigging systems in theaters or arenas. Customization can include features like noise reduction, specific dimensions to fit confined spaces, or specialized attachment points.
4. Friction and Efficiency: The groove design of rope pulleys can be customized to optimize friction and efficiency for specific applications. Different groove profiles, materials, or surface treatments can be employed to reduce friction, improve grip, and enhance the overall efficiency of the pulley system.
5. Integration with Systems: Customized rope pulleys can be designed to seamlessly integrate with existing systems or equipment. This may involve adapting the pulley’s dimensions, attachment points, or configurations to ensure compatibility and smooth operation within the specific industrial setup.
6. Mounting Options: Depending on the industrial requirements, customized rope pulleys can be designed with various mounting options. This allows for flexibility in installation, whether it’s for overhead suspension, wall-mounted setups, or specific machinery requirements.
7. Safety Considerations: Customized rope pulleys can incorporate additional safety features to meet specific industry standards or regulations. This can include features like load limit indicators, locking mechanisms, or protective covers to prevent accidents and ensure worker safety.
Manufacturers and suppliers of rope pulleys understand the diverse needs of different industries and offer customization options to tailor the pulleys accordingly. By working closely with customers and understanding their specific requirements, customized rope pulleys can be engineered to meet the unique demands of various industrial applications.
\
Can you explain the different types of rope pulleys and their functions?
There are different types of rope pulleys, each designed to serve specific functions and applications. Here’s an explanation of some common types of rope pulleys and their respective functions:
- Fixed Pulley: A fixed pulley has a stationary axle and does not provide any mechanical advantage. It changes the direction of the force applied to the rope, making it easier to pull or lift loads vertically. Fixed pulleys are often used in combination with other pulleys to create more complex pulley systems.
- Movable Pulley: A movable pulley has an axle that is free to move, allowing it to be attached to the load being lifted. When a rope passes through a movable pulley, the pulley and the load both move in the same direction. Movable pulleys provide a mechanical advantage by reducing the effort required to lift heavy loads.
- Block and Tackle: A block and tackle system consists of multiple pulleys arranged in a combination of fixed and movable pulleys. This arrangement provides a significant mechanical advantage, allowing for the lifting of extremely heavy loads with reduced effort. Block and tackle systems are commonly used in construction, rigging, and maritime applications.
- Snatch Block: A snatch block is a specialized type of pulley with a side opening that allows the rope to be easily inserted or removed. Snatch blocks are often used in rigging to redirect the force applied to the rope and change its direction. They are particularly useful in situations where the rope needs to be redirected around obstacles or to achieve a different pulling angle.
- Wire Rope Pulley: Wire rope pulleys are designed specifically for use with wire ropes, which are commonly used in heavy-duty lifting and rigging applications. Wire rope pulleys have grooves specifically shaped to accommodate wire ropes, ensuring proper alignment and reducing wear on the rope.
- Rescue Pulley: Rescue pulleys are specialized pulleys designed for use in rescue operations and emergency situations. They are typically lightweight, compact, and feature additional safety features such as locking mechanisms or built-in swivels to facilitate efficient and safe rope handling.
These are just a few examples of the different types of rope pulleys available. The choice of pulley type depends on the specific requirements of the application, including the desired mechanical advantage, load capacity, rope type, and environmental conditions. By selecting the appropriate pulley type, users can optimize the efficiency, safety, and performance of their lifting, pulling, or redirecting operations.
editor by CX
2023-10-06